1. Turn Off the Vehicle
- Before starting, ensure your vehicle is turned off before installation.
2. Locate the OBD Port
- Find the OBD-II port, usually located under the dashboard on the driver’s side. It may be behind a small panel.
3. Mount the Dashcam to the Windscreen
- Choose a spot behind the rearview mirror for optimal road visibility.
- Clean the area with a cloth to remove dust or grease.
- Peel off the adhesive backing and firmly press the dashcam mount onto the windscreen.
4. Connect the Dashcam to the OBD Power Cable
- Plug the dashcam into the provided extension cable.
- Connect the extension cable to the OBD power adapter.
- Plug the adapter into the OBD port.
5. Hide the Wires
- Tuck the cable into the headliner (the fabric at the top of the windshield).
- Run it down the A-pillar (side of the windshield) using a trim removal tool if needed.
- Continue routing the cable under the dashboard to the OBD port.
- Use cable clips or zip ties to secure any loose sections.
6. Power On and Test
- Start your vehicle. The dashcam should power on automatically.
- Check the camera angle and adjust if necessary.
- Confirm that it’s recording on the platform.
Video link: Quick Installation Guide of Howen MC30 Mini Dashcam
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article